CABLES FOR SYNCING TWO BASES TOGETHER
|
There are two ways to make two separate bases operate at the same time. You can program both bases to one control but there is no guarantee that they will respond to the signal at the exact same time. The more reliable way is to use a "Sync Cable". Each end of a sync cable plugs into the control box under each base. There are two advantages to this method:
1. Each base will still have a hand control, either a plug in one or a wireless one. The beds will operate when either one of the control is used so either occupant can control the bed, not just one of them.
2. When a button is pushed on either control, a signal is sent to each base at the same time, allowing them to start moving at pretty close to the same exact time.
Different brands of control boxes use different sync cables. The plugs are different on each type of cable.
|
OKIN SYNC CABLE, DOUBLE PLUG
This cable is for use on Okin Control Systems. Even though it looks like the plugs on a wired hand wand, it will not function the same as an Okin Y Cable if you try to use it on an Okimat 2 motor. The extra plug on each end enables various options, such as under bed lights, to be plugged in.
$60
612
|
 |
| OKIN SYNC CABLE, DOUBLE PLUG |
|
|
 |
| PLUG CONFIGURATION ON OKIN SYNC CABLE, DOUBLE PLUG |
|
|
OKIN SYNC CABLE, RJ12 STYLE
This cable is used on okin boxes where the sync cable plug looks like a phone jack. The CB1220 control unit and the CB3332 control unit are examples the boxes it will work on. They are six feet long but I have longer ones available. On the picture on the right below, the small square port is the port it fits into.
$40
|
 |
| OKIN SYNC CABLE, RJ12 STYLE PLUG |
|
|
 |
| OKIN SYNC CABLE, RJ12 STYLE |
|
|
 |
| OKIN SYNC CABLE, RJ12 STYLE PINS |
|
|
 |
| OKIN SYNC CABLE, RJ12 STYLE PORT |
|
|
KEESON SYNC CABLE
This is the cable for connecting two Keeson Control Boxes together. It has a square 4 prong micro plug on each end.
$40
121
|
 |
| KEESON SYNC CABLE |
|
|
 |
| PLUGS ON KEESON SYNC CABLE |
|
|
 |
| OKIN TO KEESON SYNC CABLE ADAPTER |
|
| OKIN TO KEESON SYNC CORD ADAPTER
THIS CORD ENABLES YOU TO SYNC TOGETHER A BASE WITH AN OKIN CONTROL BOX AND A BASE WITH A KEESON CONTROL BOX.
$15
8001322
|
 |
| OKIN TO KEESON SYNC CABLE ADAPTER PLUGS |
|
|
HHC/MOTOSLEEP SYNC CABLE
THIS CORD ENABLES YOU TO SYNC HHC/MOTOSLEEP BASES TOGETHER TO OPERATE AS ONE.
$30
|
 |
| HHC/MOTOSLEEP SYNC CABLE |
|
|
 |
| HHC/MOTOSLEEP SYNC CABLE PLUG |
|
|
 |
| HHC/MOTOSLEEP SYNC CABLE PINS |
|
|
UNKNOWN BRAND SYNC CABLE
I have just one of these. I am not sure what brand control box it works on. It is used but is fully functional.
$10
|
|
|
|
|
|
 |
| OLKIN SPLIT TOP ADAPTER |
|
| ADJUSTABLE BASE SPLIT TOP ADAPTER
The Adjustable Base Split Top Adapter connects two bases together for independent head operation and synchronized foot movement. It is compatible with Okin control boxes with a "multifunction" port. It is made for split top mattresses but can also be used on bases with two individual mattresses. Just buy a split top sheet to fill across the mattress split at the foot. This kit cannot be used on a base with "wall hugger" or "wall glide" action.
$100
|
 |
| OLKIN SPLIT TOP ADAPTER |
|
|
|
 |
| OLKIN SPLIT TOP ADAPTER INSTRUCTIONS |
|
|
OKIN "W" SPLITTER
This cable is for use on Okin Control Systems. This splitter is used when you need to plug more than two options into a control box. This cable enables you to plug in USB ports, underbed lighting, and a sync cable all at once.
$45
241
|
 |
| OKIN "W" SPLITTER FEMALE ENDS |
|
|
 |
| OKIN "W" SPLITTER |
|
|
 |
| OKIN "W" SPLITTER MALE END |
|
|
|
Copyright 2011-2024 All rights reserved. No parts of this site may be used or copied without prior consent.
|
|
|
