AdjustableBedMart.com

We Bring Comfort To You!

PARTS AND ACCESSORIES
ACCESSORIES AND REPAIR PARTS
We have a large selection of accessories and repair parts for adjustable beds. If we don't have it and it is still being made, we can usually get it for you. Scroll down to see some of the standard accessories and repair parts that we have. Even if you don't see what you need, we will try and get it for you!

Return Policy

HOW TO ORDER
CALL ME (760-773-2337) OR E-MAIL ME TO PLACE AN ORDER.  WE APOLOGIZE FOR ANY INCONVENIENCE THIS CAUSES YOU BUT BECAUSE THERE ARE NO GENERAL CROSS REFERENCES FOR ALL OF THE MAKES OF BEDS OUT THERE, MY EXPERIENCE HAS SHOWN THAT I NEED TO TALK TO YOU TO MAKE SURE YOU GET THE RIGHT PART.

Once I have figured out the right part for you, there are three ways to order them.

1. Pay by check. If you wish to pay by check I will send you an online invoice from my Paypal account. Paypal holds the funds for 7 to 10 days before releasing them to me. I will ship once the funds are released.

2. Paypal. I can send you a Paypal invoice for payment. I send the parts I have in stock out the next business day after I receive notice from paypal that a payment has been received and processed. If you pay Paypal by e-check, it may take 7 to 10 days for them to clear it. YOU DO NOT HAVE TO BE A MEMBER OF PAYPAL TO DO IT THIS WAY AND I NEVER SEE ANY OF YOUR PAYMENT METHOD INFORMATION. This is the most secure way to order. Send me an e-mail with your name, shipping address, e-mail address and phone number if you want to order this way and I will send you a Paypal Invoice.

3. Credit card over the phone. (FASTEST) I can take a credit card over the phone. I will need your card number, the expiration date, the name as it is on the card, the 3 or 4 digit security code and the zip code where you receive your invoice for the card. I will ship all in stock parts the next business day. Call me at 760-773-2337 if you want to order this way. If I am out of the office, leave a message and I will call you back. Do not leave your credit card number on the message.


PARTS DEPARTMENT HOURS
8 AM TO 5 PM PACIFIC TIME
MONDAY THRU SATURDAY
760-773-2337



MAXWELL MOTOR CONNECTOR
A "Maxwell Motor Connector"  is designed to break instead of the motor if excess weight is placed on the bed. The connector nut at the foot of the bed has a "skirt" attached that causes the foot motor to shut off sooner than the head motor.  This skirt rarely breaks and can be switched from the old connector nut to the new one. New beds have the black connector nut pictured here, older beds had a light blue connector nut. They are not interchangeable. The older style connectors are not available.

$ 25.00 EACH (short one)
$ 27.00 EACH (long one)

PICTURE OF HEAD AND FOOT MAXWELL MOTOR CONNECTORS.
HEAD AND FOOT MAXWELL MOTOR CONNECTORS. CLICK TO ENLARGE.
PICTURE OF PROPER DIRECTION OF INSTALLATION OF ACME NUT
CLICK TO ENLARGE
PHOTO OF PROPER DIRECTION OF INSTALLATION OF ACME NUT
CLICK TO ENLARGE
The above photos show the proper direction to install the acme nut on the motor.



REPLACEMENT HAND CONTROLS
We have both hard wired and wireless remote hand controls.

Does your hand control look like one of the two on the left? You might have an older Maxwell bed. Click here to find out how to determine if you have the current version or if you have to upgrade from the old version.

Prices range from $ 85.00 to $ 150.00 depending on the model.

(note: the low voltage cord on the low voltage hand control is sold as a separate item - $20.00.)




PICTURE OF LOW VOLTAGE HAND CONTROL CORD
LOW VOLTAGE HAND CONTROL CORD. CLICK ON PICTURE FOR A LARGER VIEW.
LOW VOLTAGE HAND CONTROL CORD
This is the cord that is use with the E-90, E-91 and E-92 low voltage hand control. One end plugs into the hand control and the other end plugs into the j-box under the bed. This newest version is reinforced at the end that plugs into the hand control. A similar cord is available for use in the Model 810 and 812 hand controls and the Titanium hand controls but without the reinforced end.

I can also make you one of these cords (without the reinforced end) in any length you want. Tthe factory length is about 7-8 feet. 



PICTURE OF E-90 SERIES DUAL MOTOR CONTROL CORDS
E-90 SERIES DUAL MOTOR CONTROL CORDS
DUAL MOTOR CONTROL CORDS

When you have two hard wired bases under a king mattress and want them to move as a single unit,  you need to use a Dual Motor Control Cord. For the E-90 Series of controls this would include 2  separate low voltage cords without reinforced ends, a splitter and a coupler. (Hand control and cord with reinforced end not included). For an Oki motor set up it is a special cord that has two male plugs at one end and a single female plug on the other.
E-90 SERIES CABLE $60

OKI MOTOR CABLE $45

PICTURE OF OKI DUAL MOTOR CONTROL CORD
OKI DUAL MOTOR CONTROL CORD


110 VOLT HAND CONTROLS
DISCONTINUED
ALL OF THE MANUFACTURERS THAT I KNOW OF HAVE DISCONTINUED MAKING 110 VOLT HAND CONTROLS FOR SAFETY REASONS. THE CORDS WERE PRONE TO BREAKING RIGHT WHERE THEY ENTERED THE HAND CONTROL. THIS COULD LEAVE EXPOSED WIRES WITH 110 VOLTS OF CURRENT RUNNING THROUGH THEM. A DEFINATE SAFETY ISSUE.

To tell the difference between a 110 volt hand wand and a low voltage hand wand, look at the cord connecting the hand wand to the bed base. The cord for a 110 volt hand wand is generally much thicker that a low voltage hand control cord. It is usually about the size of your pinkie finger. Some are just slighly smaller. See the picture at the top right. A low voltage hand control cord is usually much smaller, just slightly smaller in diameter than a pencil. Or it will look like the cord that goes from your land line phone base to the wall but with 6 wires instead of 4. Examples are the middle and bottom picture to the right.

110 volt hand control example
110 volt hand control example
Low voltage hand control example
Low voltage hand control example
example of low voltage hand wand and cord
Example of low voltage hand wand and cord


HALF SIDE RAILS
We have half length side rails available for adjustable beds. The advantage of half length side rails is that they help keep you from falling out of bed yet they are out of the way when you want to get out of the bed. Most of our customers use them to hold onto getting out of bed. Two sets can be purchased if you need full length protection. They have a lovely chrome finish. They are easily installed by yourself or we can install them for you if you are in our service area.

Click here for some close ups of the half side rail.

     ALONE   
   INSTALLED   
 ONE  
 $ 150.00
    $250.00
 SET (2 PIECES)  
 $ 275.00
    $375.00

PICTURE OF HALF SIDE RAIL INSTALLED ON BED
HALF SIDE RAIL INSTALLED ON BED


MATTRESS GUARDS
Mattress guards are the bar at the foot of the bed that keep your mattress from sliding off the foot of the bed when you raise the head of the bed. While the older mattress guards were flat black metal, the new ones are round chrome and are stronger that the old flat ones.  They are available in several different  styles:
1. Retainer bar that bolts to the top of the base platform (usually for a Lifestyle™ or S-Cape™ base made before mid 2011). These are 6" tall.
2. Retainer bar that pushes into plastic liners inserted into holes in the top of the base platform (toolless - fits Leggett and Platt bases made after mid 2011) These are 6" tall.
3. Retainer bar that snaps into mounting brackets mounted to the top of the base. These are 6" tall.
4. Retainer bar that bolts to the bottom of the base platform (most all other beds). These are 10" tall.

They are available several differnt widths.


$40.00

CLICK HERE TO SEE ALL OF THE BARS I HAVE AVAILABLE.

 


SIDE MATTRESS RETAINER BARS
These bars are made to be used on the side of the bed to keep light mattresses from sliding around when you get in and out of the bed. Side retainer bars are only 10" wide due to mounting requirements. You can put one or two on each side as needed, at the head and/or foot. I now have two models available. 

10" X 4"
This model is 10" wide and 4" tall. They bolt onto the top of the newer model base platforms. They are not tall enough to work on older bases that have the 4 or 5 inch foam layer on top of the wood base platform (K-style bases). They are powder coated in white enamel.
$45 each

10" X 10"
This model is 10" wide and 10" tall. They bolt onto the bottom of the older model base platforms that had 4"-5" of foam on top of the wood platform. Though they are designed for the older style bases, they can be used on the newer bases if you have a mattress that is over 10" tall. They are only available in a flat black finish.
$40 each



PICTURE LIFESTYLE HEADBOARD BRACKETS
LIFESTYLE HEADBOARD BRACKETS
HEADBOARD BRACKETS FOR S-CAPE AND MAXWELL BEDS
THESE BRACKETS ARE MADE BY AND FOR LEGGETT AND PLATT S-CAPE BASES AND MAXWELL BASES

$ 60.00

We also have the swing away brackets for attaching dual king beds to headboards.

SWING AWAY BRACKETS $ 25.00
ADAPTER PLATES $ 20.00


PICTURE OF MAXWELL BASE BRACKETS
MAXWELL BASE BRACKETS


LEGS FOR LIFESTYLE™ BASES
The  Lifestyle™ bases are equiped with interchangeable legs. They are available in 8 different sizes: 2 inch, 3 inch, 4 inch, 5 inch, 6 inch, 7 inch, 9 inch, 11 inch (NOT RECOMMENDED FOR USE WITH WHEELS) and 5 to 9 inch adjustable legs. The different size legs allow you  to use a different thickness of mattresses on each side of a dual king and they allow you to adjust the height of your bed to make it easier to get in and out of the bed. The 5 to 9 inch adjustable legs have glides instead of wheels. The 3 inch legs are also available in chrome. You need one set per bed.

3", 4", 5", 7" LEGS $ 55.00 PER SET
NEW! 2", 6", 9", 11" LEGS $ 55.00 PER SET
5" to 9" ADJUSTABLE LEGS $ 70.00 PER SET
3" CHROME LEGS $ 60.00 PER SET

PICTURE OF VARIOUS HEIGHT LEGS FOR  L & P LIFESTYLE BASES
VARIOUS HEIGHT LEGS FOR L & P LIFESTYLE BASES


OUT OF STOCK

I have to have these special made. Due to the low demand for this part, combined with a large minimum purchase from the manufacturer, it is not feasible for me to carry this item any longer. All that I can recommend is that you take your old belt to a automotive dealer and have them match it up to a fan belt of the same size.

I apologize for the inconvenience.

I hear from Blair, one of my customers, that he went to NAPA auto parts where they were able to match his drive belt up with their name brand of belt.  It is an FHP belt #4L260 measuring 1/2" x 26". He states that it is working great on his bed. Thanks for the helpful hint Blair.

picture of sleeper lounge drive belt
SLEEPER LOUNGE DRIVE BELT


WIRELESS REMOTE CONTROL UPGRADE KITS FOR BEDS WITH INDIVIDUAL 115 VOLT LIFT MOTORS
We can upgrade most hard wired hand control beds to the new remote controls. You have to replace both the hand control and the receiver under the beds. These are also the upgrade kits you will be installiing if your old wireless control system is no longer made. The hand controls on the Maxwell and Ortho upgrade kits may vary.

$385.00 to $ 470.00 DEPENDING ON THE KIT

picture of Maxwell upgrade kit.
Maxwell upgrade kit. Click on pictyure to enlarge.
picture of Ortho upgrade kit.
Ortho upgrade kit. Click on picture to enlarge
 


PICTURE OF ONE VERSION OF MAXI SAFE-MOTOR.
ONE VERSION OF MAXI SAFE-MOTOR. CLICK ON PICTURE FOR CLOSEUP
MAXI-SAFE™ LIFT MOTOR FOR L & P K-BASE
The Maxi-Safe™ lift motor fits the Maxwell K-bases (also know as InComfort™ bases). They have a built in safety switch that shuts the motor off it the bed encounters an obstruction on the way down. It is connected to the bed by an "Acme Nut" that is designed to break instead of the motor if excess weight is placed on the bed. No other motors have these features! The same motor works for the head or the foot of the bed.

THESE MOTORS ARE DISCONTINUED. OCCASIONALLY I GET USED ONES THOUGH. THEY HAVE A 30 DAY WARRANTY.

USED $ 100.00 each

PICTURE OF ONE STYLE MAXI-SAFE MOTOR
ONE STYLE MAXI-SAFE MOTOR. CLICK ON PICTURE FOR CLOSEUP


GENERIC LIFT MOTORS
We carry lift motors for most other brands of bed that don't use the Maxi-Safe motor. If you know what brand your base is, we may be able to get you an exact match, otherwise we have a generic motor that you can use. The plug on the end of the power cord is different for each manufacturer. You may have to splice the plug from the old motor onto the new motor.

NEW $ 175.00

USED $ 100


PICTURE OF GENERIC LIFT MOTOR
GENERIC LIFT MOTOR


OKI WHISPER MOTORS
Many adjustable beds use an Oki Whisper Motors. Not only are they whisper quiet, they have the option of having a battery backup in case of a power failure.

The manufacturer has discontinued the older Oki motors, with botht eh internal and the external antennas. They now offer an upgrade kit that includes the new motor, matching hand control, antenna/power odwn box and jumpers for the massage motors. This whole kit is priced only slightly  more than the older motors alone. Click here for info about the new upgrade kit.

Click on the picture to the right for more information about the older Okin motors and larger pictures of the motors and ports on the motors.


STANDARD DUTY OKI MOTOR  WITH HARD WIRED CONTROL, NO MASSAGE (INCLUDES NEW HAND CONTROL)
$ 225.00

STANDARD DUTY OKI MOTOR  WITH WIRELESS REMOTE CONTROL,NO MASSAGE (INCLUDES NEW HAND CONTROL)
$ 325.00

OKI MOTOR UPGRADE KIT (REPLACES OLDER INTERNAL AND EXTERNAL ANTENNA OKI MOTORS)
$ 400
Click here to learn about the upgrade kit.


I ALSO HAVE HEAVY DUTY OKI MOTORS AVAILABLE.
CLICK HERE TO LEARN ABOUT THESE H/D MOTORS.

HEAVY DUTY OKI MOTOR  WITH A HARD WIRED CONTROL, NO MASSAGE (INCLUDES NEW HAND CONTROL)
$ 305.00

HEAVY DUTY OKI MOTOR  WITH A WIRELESS CONTROL, NO MASSAGE (INCLUDES NEW HAND CONTROL)
$ 405.00


Click on the motor above to see more information about old style Oki motors.
The  3 problems I usually see with the oki motors are:
1. bad circuit board (whole motor inoperative)
2. broken push block inside motor
3. plastic motor housing broken

I try to salvage parts from broken motors when I can. I usually don’t have any circuit boards but I often have spare push blocks, motor housings and individual motors available.

PUSH BLOCK EACH    $ 50.00 (see below)
MOTOR HOUSING      $ 50.00 (WITHOUT PUSH BLOCKS OR MOTORS)
CIRCUIT BOARDS      $50 (USED)
INDIVIDUAL MOTORS $50

WIRELESS REMOTE CONTROL UPGRADE KITS FOR OKI/RICHMAT MOTORS WITH HARD WIRED HAND WANDS    $150.00

   
OKI MOTOR SLIDING DOOR


Picture of Antenna/Power Down Box.
Antenna/Power Down Box. Click on picture for larger view.
ANTENNA / POWER DOWN BOX
(not for use on Prodigy base)

This is the latest antenna/power down box used on some of the bases with Oki Motors. It has a small push button on the face and a small LED beside it. The LED should light up and flash green when you push any button on your hand control, whether the bed is programmed to that hand control or not. There are four possible causes if it does not light up and flash:

1. The hand control is not transmitting.
2. The bed is not plugged in.
3. The antenna/power down box and/or cord is bad.
4. The circuit board in the Oki motor is bad.

If your antenna/power down box looks similar to this but has a rocker switch on the top, it is the old style that is no longer available.

$170

There is a slot on the back of the box for two 9 volt batteries. They provide enough power to lower the bed incase of a power outage. To operate this feature, press and hold the small button on the front. The LED beside the button should light up red when you press the button.

CAUTION: Be sure to fully depress the clip on the antenna/power down box plug when you unplug it from the Oki motor. If you do not fully depress the clip you will pull the socket out of the side of the Oki motor.



PRODIGY ANTENNA / POWER DOWN BOX
(not for use on standard base)

This is the antenna/power down box used on the first generation Prodigy Base. It has a different set of push buttons on the side than the standard antenna/power down boxes. This box will not work on non-Prodigy bases. Other than that, the information about the box above applies to this box also.

CAUTION: Be sure to fully depress the clip on the antenna/power down box plug when you unplug it from the Oki motor. If you do not fully depress the clip you will pull the socket out of the side of the Oki motor.

PRODIGY ANTENNA/POWER DOWN BOX. CLICK ON PICTURES TO ENLARGE
$170

 
PRODIGY ANTENNA/POWER DOWN BOX. CLICK ON PICTURES TO ENLARGE
PRODIGY ANTENNA/POWER DOWN BOX. CLICK ON PICTURES TO ENLARGE


MASSAGE MOTORS

There are two main types of massage motors:
1. 110 volt a/c motors
2. 24 volt d/c motors




PICTURE OF 110 VOLT A/C MOTOR
110 VOLT A/C MOTOR. CLICK ON PICTURE TO ENLARGE.
110 VOLT A/C MOTORS

The 110 volt a/c motors are found mainly on the older beds. They have a thick round cord coming from them with a small square  4 pin connector on the end. You may have to cut the end off of your old massage motor and splice it onto the new one.

$60.00 EACH

PICTURE OF 110 VOLT A/C MOTOR PLUG.
110 VOLT A/C MOTOR PLUG. CLICK ON PICTURE TO ENLARGE.
-   -  -  -  -  -  -  -  -  -  -  -  -   -  -  -  -  -  -  -  -  -  -  -  -   -  -  -  -  -  -  -  -  -  -  -

24 VOLT D/C MOTORS
The 24 volt D/C motors are used on beds with oki motors. They have a thin round cord coming from them with a flat 2 pin micro connector on the end. The top right picture is the current version of the motor. The bottom right picture is the older version of the motor. They both have the same plug on the end, the black 2 pin micro plug pictured in the bottom left picture. If your old massage motors do not have this plug, then this massage motor will not fit on your bed.

CAUTION: Be sure to fully depress the clip on the massage motor plug when you unplug it from the Oki motor. If you do not fully depress the clip you will pull the socket out of the side of the Oki motor. In the picture below, the plug on the left has the socket attached. If you are careful, it can be reattached to the Oki motor.

Click on each picture for an enlarged picture.

$ 60.00 EACH

Picture of 24 volt massage motor.
24 volt massage motor. Click on picture to enlarge.
picture of 24 volt massage motor connector.
24 volt massage motor connector.
picture of Massage motor plug with socket attached.
Massage motor plug on left removed improperly. Still has the socket attached.Plug on right was removed correctly.
PICTURE OF 24 VOLT D/C MASSAGE MOTOR, OLDER STYLE.
24 VOLT D/C MASSAGE MOTOR, OLDER STYLE.


REPLACEMENT WHEELS
We carry replacement locking wheels for most beds. We have both the push in wheels and screw in wheels. The screw in wheels are for use on Lifestyle™ bases when the legs are removed. We also carry the push in or screw in glides.

PUSH IN WHEELS $ 36.00 SET OF 4 ONLY
SCREW IN WHEELS  $ 42.00 SET OF 4 ONLY
PUSH IN GLIDES $ 30.00 SET OF 4 ONLY
SCREW IN GLIDES $ 34.00 SET OF 4 ONLY

PICTURE OF VARIOUS REPLACEMENT WHEELS
VARIOUS REPLACEMENT WHEELS


PICTURE OF LIFESTYLE HINGE
LIFESTYLE HINGE. CLICK ON PICTURE TO ENLARGE.
PICTURE OF LIFESTYLE HINGE DIMENSIONS.
LIFESTYLE HINGE DIMENSIONS. CLICK TO ENLARGE.
PICTURE OF METAL LIFESTYLE HINGE.
METAL LIFESTYLE HINGE. CLICK ON PICTURE TO ENLARGE.
LIVING PLASTIC LIFESTYLE HINGE

This is the "Living" hinge that is used on the Lifestyle bases.  They can break either at the bending point or at the screw holes. They come in a pack of 2. There are usually 6 hinges on a bed.

SET OF 2   $10

METAL LIFESTYLE HINGES

I also have the older style metal hinges available. Be aware though that they can make a noise when the massage motors are running.  If you frequently break the plastic hinges and never use your massage motors, you may want to try the metal ones.

$10 each



RUBBER CASTER CUPS

Adjustable beds stay in place quite well on carpet. On tile or hardwood floors its another story though, even with locking caster. That's because the casters are made of plastic, not rubber. These rubber cups are made just for adjustable beds. They are deep enough that the bed won't roll out of them and they don't slide at all when they have weight on them. The only disadvantage is that they make it hare to pull the beds apart when you are changing the fitted bottom sheets on the dual king sets. There are 4 cups in a set and each bed takes a set.

$35.00 for a set of 4 


picture of Rubber Caster Cups
Rubber Caster Cups