|
Copyright 2011-2024 All rights reserved. No parts of this site may be used or copied without prior consent.
|
|
LINAK CONTROL SYSTEM COMPONENTS
|
 |
| LINAK LOW VOLTAGE WIRED HAND CONTROL |
|
| LINAK LOW VOLTAGE WIRED HAND CONTROL
This control is made for Linak systems with no massage. It is labeled for Serta beds as that was the most common mattress manufacturer it was used by. The cord does not unplug from the control so it must be bought as a set with the hand control.
|
LINAK WALL PLUG POWER SUPPLY
While most power supply/converters are located inline, this one plugs directly into the wall. It only accepts 110/120 volt input. The output voltage is 24 volts. The power supply is sold seperate from the cord.
|
 |
| LINAK WALL POWER SUPPLY |
|
|
 |
| LINAK CORD FROM POWER SUPPLY TO JUNCTION BOX |
|
|
 |
| LINAK JUNCTION BOX FOR WIRED HAND CONTROL |
|
| LINAK JUNCTION BOX
For some reason, this junction box has 2 item numbers - CBH1001-00 and CBH1200B. This box mounts to the bed with a bolt through the center of it. It accepts an input of 24 to 30 volts DC. It operates 2 lift motors only, no massage motors and only operates with the matching hard wired low voltage hand control.
|
 |
| LINAK MOTOR PLUGS FOR WIRED HAND CONTROL J-BOX |
|
|
 |
| LINAK HAND CONTROL AND POWER PLUGS FOR WIRED HAND CONTROL J-BOX |
|
|
|