|
Copyright 2011-2024 All rights reserved. No parts of this site may be used or copied without prior consent.
|
|
RAVEN CONTROL SYSTEM
This is the kit for upgrading the older Maxwell and Ortho bases. It can also be used to upgrade most other beds with discontinued hard wired hand controls with 110/120 volt lift motors to the wireless remote controls. You have to replace both the hand control and the receiver under the beds. This kit now uses the LS-SC2 wireless remote control or the E-92 low voltage wired hand control.
$480.00 to $550.00
DEPENDING ON THE KIT
New bases start at $649, delivered to your door in the continental U.S.
For just $100 more you can get a brand new TXL base, with a 10 year warranty, in the latest, most modern style.
|
 |
| RAVEN UPGRADE KIT |
|
|
 |
| E-92 WIRED HAND WAND |
|
|
 |
| LS-SC2 WIRELESS HAND WAND |
|
|
|
| The Model 810 control system was used on older Ortho bases. Featuring a low voltage hand control, it was only available without massage. They made 2 different versions of the 810 control system originally but only one is currently available. The model 812 is similar (with massage) but is not directly cross compatible. The current version can be made to work with both the old version and the 812 version with some minor modifications.
$275
hc503630
jb4908
|
 |
| LINAK WIRED HAND CONTROL |
|
| LINAK CBH1001
WIRED NO MASSAGE CONTROL SYSTEM
This is a Linak control system with a low voltage wired hand control and no massage. There are no universal motor jumpers so the plugs on your motors must match the plug on the j-box exactly. Components can be purchased separately.
jb8118
h/c 7954
ic8121
ps8133
|
 |
| LINAK CONTROL SYSTEM |
|
|
 |
| LINAK WIRELESS CONTROL SYSTEM |
|
|
LINAK CBH1002 WIRELESS NO MASSAGE
CONTROL SYSTEM
This is a Linak control system with a wireless hand control and no massage. There are no universal motor jumpers so the plugs on your motors must match the plug on the j-box exactly. It uses the same power supply and cord as the wired system above. Components can be purchased separately.
$400
jb8331
hc8989
ic8121
ps8133
|
 |
| LINAK WIRELESS HAND CONTROL |
|
|
RICHMAT HJC18 NO MASSAGE CONTROL SYSTEM
|
Thhe HJC18 comes in two different versions. It has both a "no massage" and a "dual massage" version. They have the same model name but a different part number and they have different output plugs. If you need the box with the dual massage you must order the HJC9G control box and matching hand wand. My supplier only sells this control box with its matching frequency hand wand. There are no generic jumpers for this control system so the plugs for the motors must match the plugs on the box. MOTORS SOLD SEPARATELY.
$300
jb9431
hcmbg
ps567
pc219
|
 |
| RICHMAT HJC18 CONTROL SYSTEM |
|
|
|
|
 |
| RICHMAT HJC18 CONTROL BOX W/SYNC |
|
|
 |
| RICHMAT HJH13D HAND WAND |
|
|
 |
| RICHMAT HJC18 NO MASSAGE CONTROL BOX W/SYNC PORTS |
|
|
 |
| RICHMAT HJC18 NO MASSAGE CONTROL BOX LABEL |
|
|
 |
| RICHMAT HJC18 NO MASSAGE CONTROL BOX PLUG - 4 PRONG |
|
|
RICHMAT HJC26 CONTROL SYSTEM
This is another no massage controlsystem made by Richmat. It uses the same HJH13 hand wand as the HJC18 Control System. My supplier only sells this control box as a set with its matching frequency hand wand, the input cord, power supply, and power cord.
$375
|
 |
| RICHMAT HJC26 CONTROL BOX |
|
|
 |
| RICHMAT HJH13D HAND WAND |
|
|
 |
| RICHMAT HJC26 CONTROL BOX MOTOR PORTS |
|
|
 |
| RICHMAT HJC26 CONTROL BOX LABEL |
|
|
 |
| RICHMAT HJC26 CONTROL BOX POWER PORT ON LEFT |
|
|
RICHMAT HJC18 DUAL MASSAGE CONTROL SYSTEM
|
RICHMAT HJC18 DUAL MASSAGE CONTROL SYSTEM
The HJC18 dual massage control systems uses the HJH55D hand wand. It offers five memory position. It also has the option to power four USB ports and an under bed light (sold separately).
$350
|
 |
| RICHMAT HJH55 HAND WAND, BUTTONS AND FEATURES MAY VARY |
|
|
 |
| RICHMAT HJC18 DUAL MASSAGE CONTROL BOX PORTS |
|
|
 |
| RICHMAT HJC18 DUAL MASSAGE CONTROL BOX LABEL |
|
|
 |
| RICHMAT HJC18 DUAL MASSAGE CONTROL BOX LIFT MOTOR 8 PRONG PLUG |
|
|
RICHMAT HJC9G DUAL MASSAGE CONTROL SYSTEM
|
 |
| RICHMAT HJC9G DUAL MASSAGE CONTROL SYSTEM |
|
| This is the control system for a Richmat base with dual massage and a wireless remote control. It is sold as a set only which consist of the HJC9G junction box and the HJH55 wireless remote control. This is to assure the frequency of the hand wand will match the frequency of the control box. I can special order the control box alone but it will not be eligible for return if it does not match. There are no generic jumpers for this control system so the plugs for the motors must match the plugs on the box. They have 7 pins in a circular pattern and a single pin in the middle.
$375
hc9316
jb9472
ps9225
|
RICHMAT HJC9G PILLOW TILT CONTROL SYSTEM
|
This is the control system for a Richmat base with "PILLOW TILT", dual massage and a wireless remote control. This control system is the same model number (HJC9G) as the ab ove system but has s different part number - "200-0029". The hand control also has the same model number "HJH55" as above but there is a button between the head and foot up/down buttons to work the pillow tilt feature. It also is sold as a set only which consist of the junction box and the wireless remote control. This is to assure the frequency of the hand wand will match the frequency of the control box. I can special order the control box alone but it will not be eligible for return if it does not match. There are no generic jumpers for this control system so the plugs for the motors must match the plugs on the box. They have 7 pins in a circular pattern and a single pin in the middle. It uses the same power supply and power cord as the above system also. Like the above system, it has a built in input cord with the integral pairing button.
$375
hc9487
jb9482
ps567
pc219
|
 |
| RICHMAT HJC9G PILLOW TILT CONTROL SYSTEM |
|
|
OKIN CONTROL SYSTEMS
It can be hard to distinguish between the different Okin control Systems. The main difference is the input cord, junction boxes and hand controls. Usually the best way to determine the correct control system is by the serial number. Sometimes the only solution to repair a bed with missing parts of the control system is to replace the whole system. That way you are guaranteed to have them work as a matched set.
|
-----------------------------------------------
|
OKIN CU358-2-L NO MASSAGE CONTROL SYSTEM, WIRELESS
This Okin CU358-2 control system is for beds with no massage. The lift motors have a plug with 2 horiontal pins. It is a 29 volt system. There are multiple hand controls that will work with this system.
$375 - $400
DEPENDING ON HAND WAND
jb695
hc621
ps567
ic220
|
 |
| OKIN CU358-2 NO MASSAGE CONTROL SYSTEM |
|
|
----------------------------------------------
|
|
|
OKIN CU358-2-L NO MASSAGE CONTROL SYSTEM, WIRED
This Okin CU358-2 control system is for beds with no massage and a wired hand wand. The lift motors have a plug with 2 horiontal pins. It is a 29 volt system.
$375
ps567
ic220
|
----------------------------------------------
|
 |
| OKIN CU358-2 DUAL MASSAGE CONTROL SYSTEM |
|
|
OKIN CU358-2 DUAL MASSAGE CONTROL SYSTEM, WIRELESS
PART# JLDP.15.001.010
This Okin CU358-2 control system is for beds with dual massage. The lift motors have a plug with 2 horiontal pins. It is a 29 volt system. It also has a "multifunction" plug. This is where you plug in either the "Sync cord" or the "multifunction adapter". The hand control pictured in this system does not support the LED light optiond.
$400
jb400
hc105
ps567
ic220
|
-----------------------------------------------
|
 |
| OKIN CU358-2 DUAL MASSAGE WITH MULTI-FUNCITONS CONTROL BOX |
|
|
OKIN CU358-2 DUAL MASSAGE AND MULTI-FUNCTION CONTROL SYSTEM, WIRELESS
This Okin CU358-2 control system is for beds with dual massage and the wall glide option. The lift motors have a plug with 2 horizontal pins. It is a 29 volt system. It also has a "multifunction" plug. This is where you plug in either the "Sync cord" or the "multifunction adapter" to operate the under bed lights and the USB ports. There is an A-B switch on the back of this control that allows you to control either the left base, the right base or both bases without removing the Sync Cable.
$450
|
 |
| OKIN CU358-2 DUAL MASSAGE WITH WALL GLIDE HAND CONTROL |
|
|
KEESON MC120PR/CU380 CONTROL SYSTEM
This control system is for beds with no massage. The lift motor plugs have 2 horizontal pins. It is a 29 volt system. It does not have a "multifunction" plug but it does have a plug for a "Sync cord". There are multiple hand controls that will work with this control box.
$360 - $405
cb2098
hc2225
ic220
ps567
pc219
|
 |
| KEESON CONTROL BOX |
|
|
 |
| OKIN RF3409 WIRELESS REMOTE CONTROL |
|
|
 |
| OLKIN RF365B WIRELESS REMOTE CONTROL |
|
|
 |
| OKIN RF373D HAND WAND |
|
|
SOFTIDE 2100 SERIES
NO MASSAGE
This control system is being discontinued by my supplier. You will eventually have to replace both the control unit (with the CU358-2-L) and the hand wand. You can reuse the input cord, power supply, and power cord (see CU358-2-l control system above for photos). The lift motor plugs have 2 horizontal pins. It is a 29 volt system. The hand control for this system just has buttons for head and foot up/down and a flat button. No memory buttons.
$400
cb8000211/800695
hc8000333/8000635
ic220
ps567
pc219
|
 |
| SOFTIDE 2100 CONTROL UNIT |
|
|
 |
| SOFTIDE 2100 HAND CONTROL |
|
|
ECO WIRED TO WIRELESS CONVERSION KIT
You can use this kit to convert your hard wired Okimat or Richmat motor to a wireless remote control. It just plugs in where the wired remote used to plug in.
$300
rec8584
hc9215
|
 |
| ECO CONVERSION KIT PLUGGED INTO MOTOR |
|
|
 |
| ECO CONVERSION KIT |
|
|
 |
| ECO HAND CONTROL |
|
|
 |
| ECO HAND CONTROL LABEL |
|
|
 |
| ECO RECEIVER LABEL |
|
|
 |
| REVERIE PERFORMANCE UPGRADE PACKAGE |
|
| PERFORMANCE UPGRADE PACKAGE
Reverie sells their control systems as a complete "Upgrade Package".
This package consist of:
* Hand wand
* Control box with built in Bluetooth for connecting to the Reverie Nighstand app
* Reverie's latest design head and foot lift motors
* Power cord and power supply
* Underbed LED lighting strip
* Small parts and accessories used for installation
$700
Please not: The control box in this package will not work with your old motors with the round connectors.
|
----------------------------------------------
|
PERFORMANCE+ UPGRADE PACKAGE
Reverie sells their control systems as a complete "Upgrade Package".
This package consist of:
* Head and foot 3-D massage motors
* Hand wand
* Control box with built in Bluetooth for connecting to the Reverie Nighstand app
* Reverie's latest design head and foot lift motors
* Power cord and power supply
* Underbed LED lighting strip
* Small parts and accessories used for installation
$900
Please not: The control box in this package will not work with your old motors with the round connectors.
|
 |
| REVERIE PERFORMANCE+ UPGRADE PACKAGE |
|
|
HHC CONTROL SYSTEMS
HHC is the parent company for MotoSleep adjustable beds. My supplier only carries two models of control system and has a very limited number of them. I can only purchase the hand control, input cord, and control box as a set. The power supply and power cord can be purchased separately if also needed. In addition to the head and foot movement, this system has a third motor to provide for lifting the whole bed up at the head (Trendeleburg position).
|
 |
| HHC CB18 CONTROL BOX WITHOUT BLUETOOTH |
|
| CB18 Control Systems
(NO SCREEN)
I have access to two versions of the CB18 control system with no screen on the hand wand. The CB18 and the CB18B (bluetooth). They look identicle but the hand controls are not interchangable. They operate a third motor that tilts the complete bed up at the head (trendelenburg position). Both are sold as a set consisting of the control box, hand wand and input cord together.
$370
Power cord and power supply sold separately.
|
 |
| HHC CH18 HAND WAND |
|
|
----------------------------------------------
|
 |
| MOTOSLEEP PILLOW TILT CONTROL BOX |
|
|
CB18B Control System
(WITH SCREEN)
I have access to a version of the CB18 control system with a screen on the hand wand. It is also called a CB18B with bluetooth. The control box looks identical to the CB18B control box above but the hand controls are not interchangeable. This one operate a third motor that tilts the first 10 inches at the head of the base (pillow tilt). It is a used set and is sold as a set consisting of the control box, hand wand and input cord together. It is not returnable.
$200
Power cord and power supply sold separately.
|
 |
| MOTOSLEEP PILLOW TILT HAND CONTROL |
|
|
ELECTROPEDIC LOW VOLTAGE HAND WAND CONTROL SYSTEM
(DISCONTINUED)
|
 |
| ELECTROPEDIC LOW VOLTAGE HAND WAND CONTROL SYSTEM LABEL |
|
|
 |
| ELECTROPEDIC LOW VOLTAGE HAND WAND CONTROL SYSTEM |
|
|
 |
| ELECTROPEDIC LOW VOLTAGE HAND WAND CONTROL SYSTEM PORTS |
|
|
 |
| ELECTROPEDIC LOW VOLTAGE HAND WAND |
|
|
 |
| ELECTROPEDIC LOW VOLTAGE HAND WAND PLUG |
|
| Back when Electropedic was still manufacturing their own bases, this was the low voltage hand control system they used. They no longer have any of these parts in stock. I have just one used set that I salvaged from a bed with a broken motor.
$100
|
|
