MAXWEL/TITANIUM/ORTHO
UPGRADE TO RAVEN INFORMATION
|
For the Maxwell, Orthomatic and Titanium systems, there is an upgrade kit that can be installed. The kit manufacturer has made a jumper set that will allow the lift and massage motors to be used with their Beta Raven (BR) j-boxes. This new system is easy to install with no splicing needed and is much more reliable. It comes with either a wireless remote control (varies according to availablility) or you can opt for a wired hand wand. It you do not mind doing a little splicing, this kit can be used on many other makes of bases.
|
 |
| Raven upgrade kit. |
|
| |
 |
| Maxwell j-box on left being compared to the new Raven j-box. |
|
|
 |
| Orthomatic/Titanium j-box. |
|
|
The picture on the above right is a picture of the G-SMR-2 upgrade hand control. This is the control that usually comes with the upgrade kit but it can vary due to availablility.
The picture on the very top left is the new upgrade kit with the jumpers for the Ortho and Titanium bases. The Maxwell upgrade kit is identicle with the exception of the jumpers being slightly different.
The gray j-box in the middle left picture is from an old Maxwell base next to one of the new black Raven j-boxes. The old boxes can vary in color (blue, grey, green, pink, yellow) but the new boxes are always black.
Pictured at the bottom left is a j-box from an Ortho or Titanium base. Note that it is rectangular, rather than square.
|
|
