AdjustableBedMart.com

We Bring Comfort To You!

HAND CONTROLS

Hand controls come in both wired and wireless configuration. The wireless controls have to be programmed to each bed and the procedure is different for each model and brand.  I have listed the controls by those I have available, those you have to go direct to the base retailer for and those that are discontinued. For the discontinued ones I have listed the replacment or upgrade if they are available. Click on each picture to see a larger view.

CURRENTLY AVAILABLE CONTROLS

LSSC-2.1 HAND WAND
LSSC-2.1 HAND WAND
PICTURE OF LSSC-2 HAND CONTROL
LSSC-2 HAND CONTROL
OKIN RF339 18 BUTTON HAND WAND
PRODIGY HAND CONTROL
PRODIGY 2.0 HAND CONTROL
PRODIGY COMFORT ELITE HAND CONTROL
ADJUST-A-MAGIC E-92 HAND CONTROL
PICTURE OF LIFESTYLE LOW VOLTAGE HAND CONTROL
LIFESTYLE LOW VOLTAGE HAND CONTROL
PICTURE OF PRO-MOTION WIRED HAND CONTROL WITH 5 PIN CONNECTOR.
PRO-MOTION WIRED HAND CONTROL WITH 5 PIN CONNECTOR.
LINAK WIRED HAND CONTROL
LINAK FALCON HAND WAND
LINAK SUNRISE HAND CONTROL
LSSC PLUS NO MASSAGE HAND CONTROL
LSSC PLUS DUAL MASSAGE HAND CONTROL
BAS-X HAND WAND
PICTURE OF INTERFLEX BRONZE HAND CONTROL.
INTERFLEX BRONZE HAND CONTROL.
PICTURE OF SILVER HAND CONTROL
SILVER HAND CONTROL
ECO WIRELESS HAND CONTROL
PICTURE OF WH 2 WIRELESS HAND CONTROL
WH 2 WIRELESS HAND CONTROL
PICTURE OF WH 1 WIRED HAND CONTROL
WH 1 WIRED HAND CONTROL
SERTA 40+ WIRED HAND WAND
FLEX FIT HAND CONTROL
FLEX FIT PLUS HAND CONTROL
OKIN RF258A HAND CONTROL
OKIN RF258A HAND CONTROL
OKIN RF258G HAND CONTROL
OKIN RF258B HAND CONTROL
OKIN RF3409 HAND CONTROL
OKIN RF358A HAND CONTROL
OKIN RF358A HAND CONTROL TEMPUR PEDIC VERSION
 
MODEL 810 HAND CONTROL
IDENTIFYING YOUR MODEL 810 HAND CONTROL
The Model 810 hand control is one of the few controls that were made in two different versions that looked identicle but were not cross compatible. One is still available and the other is not. However, if you don't mind doing a little simple rewiring, you can switch from the discontinued model to the current model. 

RICHMAT HJH13 HAND CONTROL
 
RICHMAT HJH? HAND CONTROL
RICHMAT HJH55 DUAL MASSAGE HAND WAND
RICHMAT HJH55 PILLOW TILT HAND WAND
 
RICHMAT HJH? HEAD ONLY WIRED HAND CONTROL
RICHMAT HJH8L WIRED HAND CONTROL
 


CONTROLS AVAILABLE ONLY FROM THE MANUFACTURER
Some manufacturers will only sell direct to the bed owner. They will not sell to techs. You must contact them directly.

RICHMAT HAND CONTROLS
Richmat will only sell in mass quantities. I can only get the controls that one of my base manufacturers use on their bases. For the other controls you have to try to determine who assembled the base and contact them direct. Below are the hand controls that I currently do not have a source for.

RICHMAT HJH3 WIRELESS HAND CONTROL
RICHMAT HJH3L WIRED HAND CONTROL
RICHMAT HJH5 WIRED HAND CONTROL
RICHMAT HJH8B WIRELESS HAND CONTROL
RICHMAT HJH13A HEAD ONLY WIRED HAND CONTROL
RICHMAT HJH13B HEAD ONLY WIRELESS HAND CONTROL
   
----------------------------------------------

REVERIE. ALL CONTROLS FROM THIS COMPANY YOU MUST BUY DIRECT FROM REVERIE
REVERIE HAND CONTROLS
Reverie will only sell parts to the actual bed owners. They will not sell to techs or retail stores. Usually their hand controls have their name on them. If you need any parts, you must call them directly.

REVERIE. ALL CONTROLS FROM THIS COMPANY YOU MUST BUY DIRECT FROM REVERIE
----------------------------------------------

RIZE. ALL CONTROLS FROM THIS COMPANY YOU MUST BUY DIRECT FROM RIZE.
RIZE AND CUSTOMATIC HAND WANDS

Rize and Customatic will only sell parts to the actual bed owners. They will not sell to techs or retail stores. Usually their hand controls have their name on them. If you need any parts, you must call them directly.

CUSTOMATIC HAND CONTROL SAMPLE


DISCONTINUED  HAND CONTROL MODELS

LIFESTYLE CONTROLS

BASIS HAND WAND. USE LS-SC2
LS-T9 HAND WAND, USE LS-SC2
CRAFTMATIC HAND WAND. CRAFTMATIC NO LONGER SELLS THIS ONE BUT THE LS-SC2 WILL WORK.
SEALY CLASSIC, USE LS-SC2
SEALY MEMORY HAND WAND, USE LS-SC2
SEALY PREMIER HAND WAND, FREQUENCY DISCONTINUED, MUST INSTALL RAVEN UPGRADE
 
PHOTO OF TEMPUR PEDIC HAND CONTROL, USE LS-SC2
TEMPUR PEDIC HAND CONTROL, USE LS-SC2
 
LS-SCT8 HAND CONTROL, USE THE LS-SC2
LS-SCT8 HEAD TILT HAND WAND, USE LS-SC2
LS-SCT8TVZG HAND WAND, USE LS-SC2
LS-SC95LS HAND WAND, USE LS-SC2
LS-SC95MR HAND WAND, USE LS-SC2
LS-SC95SS HAND WAND, USE LS-SC2
LS-SC00 HAND WAND, USE LS-SC2
LS-SC01 HAND WAND, USE LS-SC2
LS-SC91SS HAND WAND, USE LS-SC2
PIRTURE OF SERTA PPII HAND CONTROL. DISCONTINUED, YOU MUST USE THE E-95MR HAND CONTROL.
SERTA PPII HAND CONTROL. DISCONTINUED, YOU MUST USE THE LS-SC2 HAND CONTROL.
PPIII HAND CONTROL. USE THE LS-SC2 HAND CONTROL.
PICTURE OF DESIGNER SERIES WIRELESS REMOTE, MUST INSTALL DESIGNER SERIES UPGRADE KIT
DESIGNER SERIES WIRELESS REMOTE, MUST INSTALL DESIGNER SERIES UPGRADE KIT
E-SERIES CONTROLS

E-90 HAND WAND, USE E-92 HAND WAND
E-91 HAND WAND, USE E-92 HAND WAND
PICTURE OF NEWEST CRAFTMATIC WIRED HAND WAND. CRAFTMATIC NO LONGER SELLS THIS ONE BUT THE E-92 WILL WORK.
NEWEST CRAFTMATIC WIRED HAND WAND. CRAFTMATIC NO LONGER SELLS THIS ONE BUT THE E-92 WILL WORK.
PICTURE OF SERTA E-91 WIRELESS
SERTA E-91 WIRELESS
PICTURE OF GENERIC E-91 WIRELESS
GENERIC E-91 WIRELESS
PICTURE OF E-94 WIRELESS HAND WAND
E-94 WIRELESS HAND WAND
PICTURE OF BATTERY DOOR LOCATION ON BACK OF THE ABOVE E-SERIES CONTROLS.
BATTERY DOOR LOCATION ON BACK OF THE ABOVE E-SERIES CONTROLS.
Pictured above are 3 of the old E-series wireless remote controls. The picture at left shows where the batteries loaded into the side of the back of the control instead of the middle of the back.The picture to the right is the junction box that they were matched to. Even though it looks like the new Raven boxes, it was programmed with a different frequency so the newer Raven controls will not program to it. If you have one of the above controls and they or the junction box malfunction, you will have to upgrade to the new Raven control system. However, because the ports for the plugs on the old box are the same as the ports on the new boxes, you will not need the jumper kit.

PICTURE OF JUNCTION BOX FOR THE OLD E-SERIES CONTROLS.
JUNCTION BOX FOR THE OLD E-SERIES CONTROLS.
MAXWELL PRODUCTS

R2T3ABC, R2T4ABC HAND CONTROL. WITH A-B-C SWITCH. YOU MUST UPGRADE TO THE NEW RAVEN SYSTEM.
R2T4BR HAND CONTROL, NO A-B-C SWITCH, MUST UPGRADE TO THE LS-SC2 HAND CONTROL
ANOTHER VERSION OF THE R2T3ABC, R2T4ABC HAND CONTROL. YOU MUST UPGRADE TO THE NEW RAVEN SYSTEM.
PICTURE OF RO HAND CONTROL. YOU MUST UPGRADE TO THE NEW E-00 KIT.
RO HAND CONTROL. YOU MUST UPGRADE TO THE RAVEN CONTROL SYSTEM.
PICTURE OF R0-T4 ABC HAND WAND. LOOK FOR THE ABC SWITCH IN THE BATTERY COMPARTMENT. YOU MUST UPGRADE TO THE E-00 KIT.
R0-T4 ABC HAND WAND. LOOK FOR THE ABC SWITCH IN THE BATTERY COMPARTMENT. YOU MUST UPGRADE TO THE RAVEN CONTROL SYSTEM.
PICTURE OF R0-T4BR HAND CONTROL (NO ABC SWITCH IN THE BATTERY COMPARTMENT). YOU MUST UPGRADE TO THE E-00 HAND CONTROL.
R0-T4BR HAND CONTROL (NO ABC SWITCH IN THE BATTERY COMPARTMENT). USE LS-SC2
SEALY CLASSIC HAND WAND. YOU MUST UPGRADE TO THE NEW RAVEN SYSTEM.
PICTURE OF LV 23 LOW VOLTAGE DUAL MASSAGE HAND CONTROL. IT CONNECTS TO A PINK J-BOX UNDER THE BED.YOU MUST UPGRADE TO THE RAVEN E-92 SYSTEM.
LV 23 LOW VOLTAGE DUAL MASSAGE HAND CONTROL. IT CONNECTS TO A PINK J-BOX UNDER THE BED.YOU MUST UPGRADE TO THE RAVEN E-92 SYSTEM.
PICTURE OF LV 23 LOW VOLTAGE SINGLE MASSAGE HAND CONTROL. IT CONNECTS TO A PINK J-BOX UNDER THE BED.YOU MUST UPGRADE TO THE RAVEN E-92 SYSTEM.
LV 23 LOW VOLTAGE SINGLE MASSAGE HAND CONTROL. IT CONNECTS TO A PINK J-BOX UNDER THE BED.YOU MUST UPGRADE TO THE RAVEN E-92 SYSTEM.
PICTURE OF Simmons RPSP. Discontinued. You must upgrade to the new Raven System.
Simmons RPSP. Discontinued. You must upgrade to the new Raven System.
PICTURE OF SEALY/CELEBRITY CHOICE/RM2T1 HAND CONTROL. UPGRADE TO RAVEN CONTROL SYSTEM.
SEALY/CELEBRITY CHOICE/RM2T1 HAND CONTROL. UPGRADE TO RAVEN CONTROL SYSTEM.
PICTURE OF OLD STYLE MR2T9
MR2T9 OLD STYLE. DISCONTINUED. YOU MUST UPGRADE TO THE RAVEN SYSTEM.
ORTHO/TITANIUM CONTROLS

PICTURE OF SIGNATURE WIRED HAND CONTORL.
SIGNATURE WIRED HAND CONTORL. DISCONTINUED, YOU MUST UPGRADE TO THE NEWEST RAVEN SYSTEM.
PICTURE OF GW 02 HAND CONTROL
GW O2 HAND CONTROL, DISCONTINUED, YOU MUST UPGRADE TO THE RAVEN HAND CONTROL AND J-BOX
PICTURE OF TITANIUM HAND CONTROL. DISCONTINUED, YOU  MUST UPGRADE TO THE NEWEST TITANIUM SYSTEM.
TITANIUM HAND CONTROL. DISCONTINUED, YOU MUST UPGRADE TO THE RAVEN SYSTEM.
PHOTO OFORTHO ,
ORTHO, DISCONTINUED, YOU MUST UPGRADE TO THE RAVEN HAND CONTROL SYSTEM.
PICTURE OF MODEL 4002/GWO2. DISCONTINUED, YOU MUST UPGRADE TO THE NEW TITANIUM SYSTEM.
MODEL 4002/GWO2. DISCONTINUED, YOU MUST UPGRADE TO THE RAVEN SYSTEM.
PICTYURE OF OLD STYLE TITANIUM. DISCONTINUED, YOU MUST UPGRADE TO THE NEW TITANIUM SYSTEM.
OLD STYLE TITANIUM. DISCONTINUED, YOU MUST UPGRADE TO THE RAVEN SYSTEM.
PICTURE OF MODEL 812 HAND CONTROL. DISCONTINUED, YOU MUST UPGRADE TO THE RAVEN SYSTEM.
MODEL 812 HAND CONTROL. DISCONTINUED, YOU MUST UPGRADE TO THE RAVEN SYSTEM.
PICTURE OF INTERFLEX GOLD. YOU MUST UPGRADE TO THE RAVEN SYSTEM.
INTERFLEX GOLD. YOU MUST UPGRADE TO THE RAVEN SYSTEM.
 
ELECTROPEDIC CONTROLS

PICTURE OF MODEL EL, NO UPGRADE AVAILABLE BECAUSE MOTORS ARE LOW VOLTAGE.
MODEL EL, NO UPGRADE AVAILABLE BECAUSE MOTORS ARE LOW VOLTAGE.
PICTURE OF ELECTROPEDIC LOW VOLTAGE WITH MASSAGE. NO REPLACEMENT AVAILABLE.
ELECTROPEDIC LOW VOLTAGE WITH MASSAGE. NO REPLACEMENT AVAILABLE.
PICTURE OF WR HAND WAND, NO UPGRADE AVAILABLE BECAUSE MOTORS ARE LOW VOLTAGE.
WR HAND WAND, NO UPGRADE AVAILABLE BECAUSE MOTORS ARE LOW VOLTAGE.
 
PICTURE OF VS HAND WAND, NO UPGRADE AVAILABLE BECAUSE MOTORS ARE LOW VOLTAGE.
VS HAND WAND, NO UPGRADE AVAILABLE BECAUSE MOTORS ARE LOW VOLTAGE.
 


110 VOLT HAND CONTROL
All 110 volt hand controls are no longer made due to liability issues frayed wires shocking the bed owner. The Maxwell to Raven upgrade kit will work on these beds. All brands other than Maxwell will require some cutting and splicing of wires. 

To tell the difference between a 110 volt hand wand and a low voltage hand wand, look at the cord connecting the hand wand to the bed base. The cord for a 110 volt hand wand is generally much thicker that a low voltage hand control cord. It is usually about the size of your pinkie finger. Some are just slighly smaller. A low voltage hand control cord is usually much smaller, just slightly smaller in diameter than a pencil. Or it will look like the cord that goes from your land line phone base to the wall but with 6 wires instead of 4. 

The Raven Upgrade Kit is the only option for replacing these hand controls. It consist of a new junction box for under the bed, a new wireless remote control and jumpers so that your old motors will plug into the new box. The kit is made for Maxwell and Ortho bases but can be made to work on most bases with 110/120 volt lift motors. Click here to learn more.


P[ICTURE OF MAXWELL NO MASSAGE HAND CONTROL.
MAXWELL NO MASSAGE HAND CONTROL.
PICTURE OF MAXWELL V23 HAND CONTROL.
MAXWELL V23 HAND CONTROL.
PICTURE OF MAXWELL NO MASSAGE HAND CONTROL.
MAXWELL NO MASSAGE HAND CONTROL.
PICTURE OF OLD 110 VOLT HI/LOW HAND CONTROL. YOU MUST UPGRADE TO THE GENERIC 110 VOLT HAND CONTROL.
OLD 110 VOLT HI/LOW HAND CONTROL.NO LONER AVAILABLE. YOU MUST UPGRADE TO THE RAVEN CONTROL SYSTEM. SPLICING REQUIRED.
PICTURE OF NIAGARA/ADJUST-A-BED 110 VOLT REMOTE.
NIAGARA/ADJUST-A-BED 110 VOLT REMOTE.
PICTURE OF GENERIC 110 VOLT HAND WAND. NO LONGER AVAILABLE. YOU MUST UPGRADE TO THE NEW RAVEN CONTROL SYSTEM. SPLICING REQUIRED.
GENERIC 110 VOLT HAND WAND. NO LONGER AVAILABLE. YOU MUST UPGRADE TO THE NEW RAVEN CONTROL SYSTEM. SPLICING REQUIRED.
 
PICTURE OF OLD STYLE 110 VOLT, VARIABLE SPEED MASSAGE, HAND CONTROL. NO LONGER AVAILABLE. MUST SWITCH TO GENERIC 110 VOLT HAND CONTROL.
OLD STYLE 110 VOLT, VARIABLE SPEED MASSAGE, HAND CONTROL. NO LONGER AVAILABLE. YOU MUST SWITCH TO THE RAVEN CONTROL SYTEM. SPLICING REQUIRED.
PICTURE OF OLD STYLE 110 VOLT, TWO SPEED MASSAGE, HAND CONTROL. NO LONGER AVAILABLE. MUST SWITCH TO GENERIC 110 VOLT HAND CONTROL.
OLD STYLE 110 VOLT, VARIABLE SPEED MASSAGE, HAND CONTROL. NO LONGER AVAILABLE. YOU MUST SWITCH TO THE RAVEN CONTROL SYTEM. SPLICING REQUIRED.
MISC. HAND CONTROLS

PICTURE OF PINNACLE LOW VOLTAGE HAND CONTROL. USE E-90 HAND WAND
PINNACLE LOW VOLTAGE HAND CONTROL.
PICTURE OF BABCOCK & MORE LOW VOLTAGE HAND CONTROL. NO LONGER AVAILABLE AND NOR REPLACEMENT AVAILABLE.
BABCOCK & MORE LOW VOLTAGE HAND CONTROL. NO LONGER AVAILABLE AND NOR REPLACEMENT AVAILABLE.
SORRY, NO LONGER AVAILABLE AND NO REPLACEMENT.
SLEEPER LOUNGE. SORRY, NO LONGER AVAILABLE AND NO REPLACEMENT.
PICTURE OF SLEEP SCIENCE  NO LONGER AVAILABLE AND NOR REPLACEMENT AVAILABLE.
SLEEP SCIENCE NO LONGER AVAILABLE AND NOR REPLACEMENT AVAILABLE.
Blackstone is out of business. I do not have a replacement at the time.
Blackstone is out of business. I do not have a replacement at the time. The first person who sends me your old one and and I can match it up, I will give a free hand control to.
PICTURE OF OKIN 357A, NO REPLACEMENT
OKIN 357A, NO REPLACEMENT
BRAND UNKNOWN