AdjustableBedMart.com

We Bring Comfort To You!

ELECTROPEDIC MATTRESSES
Adjustable beds are Electropedic’s only business. They have been owned and operated by the same family since its beginning. They make both solid core latex mattresses and inner spring mattresses.

All of Electropedic’s mattresses are double sided and are covered by one of the best warranty in the business : 2-20 years. (click here to see warranty)



INNERSPRING MATTRESSES

MODEL PC
POCKETED COIL MATTRESS
We now have available the first foam encased pocket coil innerspring mattress made exclusively for adjustable beds using the  Leggett 609 spring unit. The encasement has specially slotted foam rails that provide easy bendability and increased ventilation. There is an inside girdle that covers the middle two-thirds of the mattress to hold the coils and foam in place to increase bendability and reduce bunching.

The mattress is available in 2 firmness. The Cushion Firm has 1 inch 24 ILD toppers and the Extra Firm has 1 inch 44 ILD toppers. Both are fully reversible.

These  mattresses have the same bamboo/cotton fabric and quilt as the HP model.

Since all firmness of the mattress use the same inner spring, there will not be any variation height and length between different firmness, allowing you to mix and match the firmness of mattresses on a dual king or queen adjustable bed.

PICTURE OF POCKETED COILS AND FOAM INCASEMENT. NOTICE THE SLOTS IN THE FOAM INCASEMENT THAT ALLOW IT TO BEND EASILY.
POCKETED COILS AND FOAM INCASEMENT. NOTICE THE SLOTS IN THE FOAM INCASEMENT THAT ALLOW IT TO BEND EASILY.
PICTURE OF INSIDE GIRDLE THAT HOLDS THE COILS AND FOAM IN PLACE TO INCREASE BENDABILITY AND REDUCE BUNCHING.
INSIDE GIRDLE THAT HOLDS THE COILS AND FOAM IN PLACE TO INCREASE BENDABILITY AND REDUCE BUNCHING.


NATURAL LATEX MATTRESSES
Electropedic offers 2 styles of latex mattresses, the Latex and the Latex High Profile (HP). Both are made from the finest quality Talalay Latex and both are available in four different firmness.

Electropedic uses only Talalay Process latex. There is no Dunlop Process latex in any of their beds. Click here to learn about the difference between the Talalay Process and the Dunlop Process.

Electropedic buys its latex from Latex International, the leading maker of Talalay Latex. Latex International’s Talalay latex is certified by Oeko-Tex (Europe’s highest environmental consumer product standard) to be free of harmful substances or chemicals.

Scroll to the bottom of this page to learn about how latex firmness is determined.
 

LATEX
HIGH PROFILE
The Latex HP mattress is a Talalay laminated latex that contains a 6” center core with a 1” soft latex top and bottom. Available in four firmness, plush, regular firm, extra firm and ultra firm. The mattresses are quilted in a Bamboo/Cotton blend fabric and are fully reversible. The Latex HP mattress now has a border with a 1" channel quilt in brown suede ticking.

LATEX HP ON LEFT, LATEX ON RIGHT
LATEX MATTRESS
A 5.6” core of Talalay latex that is available in four firmnesses - soft, firm, extra firm and ultra firm. The mattresses are quilted in a Bamboo/Cotton blend fabric and are fully reversible. This is the perfect mattress for the consumer who wants firm support without the pressure points caused by firm innerspring mattresses.

LATEX HIGH PROFILE FIRMNESS CHART
AVAILABLE          1" TOPPER         6" CORE         1" TOPPER    
 FIRMNESSES         ILD         ILD         ILD
       
 PLUSH         19         28         19
       
 REGULAR FIRM          19         32         19
       
 EXTRA FIRM         24         36         24
       
 ULTRA FIRM         28         44         28

 
LATEX FIRMNESS CHART
AVAILABLE     

    5.6" CORE    

FIRMNESSES    
         ILD    
       
 SOFT        
        24        
       
 REGULAR FIRM 
       
        28        
       
 EXTRA FIRM
       
        36
       
       
 ULTRA FIRM
       
        40        


The firmness of latex is measured in terms of "Indentation Load Deflection" (ILD). Standard Latex ranges in firmness from 12 ILD to 44 ILD. The higher the number, the firmer the latex is. There is a range of numbers in each ILD because every batch has a slight variation in firmness.

Soft (17-25 ILD), Medium (26-30 ILD), Firm (31-35 ILD), Extra Firm (36-42 ILD), and Hard (43-48 ILD).



ORGANIC LATEX MATTRESSES

 ORGANIC COMFORT®
MATTRESSES


The Organic Comfort® mattress is Gots and Gols certified! Consisting of a 6.0” center core with a 1.0” soft organic latex top and bottom, it is available in three firmnesses: plush, cushion firm, superior firm. The mattresses are fully reversible.
All firmnesses are the same height so each half of a couple can have a different firmness and the mattresses will still match in height on a dual king bed.

100% Organic Cotton Fabric
100% Natural Wool Fire Barrier
Channel Quilted
Fully Revesible

Global Organic Latex Standard
The "Global Organic Latex Standard", GOLS in short, is the newly introduced standard for sustainable processing methods of latex products from organic raw materials. This mainly addresses the standards which need to be maintained with relevance to processing, manufacturing, packing, labeling, trading and distribution of latex products. In addition to the use of organic raw material, this standard also concentrates on aspects such as human health, safety and welfare, and environment in the manufacturing process of latex products

Global Organic Textile Standard (GOTS)
The Global Organic Textile Standard  is recognised as the world's leading processing standard for textiles made from organic fibres. It defines high-level environmental criteria along the entire organic textiles supply chain and requires compliance with social criteria as well. Only textile products that contain a minimum of 70% organic fibres can become GOTS certified. All chemical inputs such as dyestuffs and auxiliaries used must meet certain environmental and toxicological criteria. The choice of accessories is limited in accordance with ecological aspects as well. A functional waste water treatment plant is mandatory for any wet-processing unit involved and all processors must comply with minimum social criteria. The key criteria of GOTS, its quality assurance system and the principles of the review and revision procedure are summarised in this section.